The RTSP URL will have the following format: rtsp://192.168.100.88:554/1, just replace 192.168.100.88 with the IP address of your cameraĬlick Apply and the RTSP feed will connect. In this window, you need to enter the RTSP URL in the box labeled URI. That will open the Web Stream Properties window. Then enter the RTSP URL which has the format of: rtsp://192.168.100.88:554/1, replacing 192.168.100.88 with the IP address of your camera.Ĭlick OK and the RTSP feed will start coming into vMix as an input.Īdd a new Layer and choose Network from the side. Leave the Stream Type set to RTSP over UDP. Then select Stream/SRT in the Input Select window.
This will have the form of: rtsp://192.168.100.88:554/1, replace 192.168.100.88 with the IP address of your camera.Īfter the camera has been added as a source in OBS you may need to click Cut to get the feed to show up in the preview window.Ĭhoose Add Input in the bottom left corner of vMix. In the Input field, you need to enter the RTSP string. Uncheck the "Local File", "Restart playback when source becomes active", and "Show nothing when playback ends" checkboxes.
WIRECAST SRT SOFTWARE
Both Telestream’s Cloud Stream Monitor and Wirecast live production and streaming software recently took part in SRT Alliance’s InterOp Plugfest kick-off. To add the RTSP feed of a camera into OBS, click on the + button in the sources window located in the bottom left of OBS.Ĭhoose Create new and name the source whatever you would like, then press OK. SRT (Secure Reliable Transport) is an open-source video transport protocol developed by Haivision that enables the delivery of high-quality, low-latency video across the public internet. We have a guide that goes over the video settings when using the RTSP feed here.
When using the Network video output from the camera you can adjust the output resolution and framerate from the Video section of the camera’s web interface.
If you have not already set your camera up on the network you can refer to this guide here. Please Note: In order to access the RTSP feed, your camera will need to be connected to your network and have an IP address set in the range of your local network. This article will cover bringing the RTSP feed of the camera into some commonly used Video Mixing software (OBS, vMix, and Wirecast). Solution home PTZOptics Quick Start Section Accessing the RTSP feed of a PTZOptics camera
0 kommentar(er)
